Corrosion Under Pipe Support (CUPS) is a huge risk to the integrity of pipelines. People usually do not pay much attention to it, but this is one of the leading reasons for pipeline inherent failure. Locations where corrosion tends to occur most are at the pipe supports, where there is trapped moisture, debris, and damaged coatings that provide an ideal environment where corrosion can occur. This results in serious localised corrosion, leaks, and expensive shut-downs. A-Star Testing & Inspection is the service provider for Corrosion Under Pipe Support (CUPS) inspection. We detect starting corrosion and provide you with clear repairing and preventive perspectives. Our specialists maintain your pipelines safe, compliant, and operational using the latest non-destructive testing (NDT). We aim at reducing the possibility of an untimely failure.

What is Corrosion Under Pipe Support (CUPS)?

One form of external corrosion is Corrosion Under Pipe Support (CUPS). It influences the pipelines that are at the place of rest at support, saddles, or hangers. Such a depreciation of the assets is difficult to detect. It is not visible through what is known as a regular visual inspection. The causes of CUPS are the following:

• Moisture retention: The water is trapped between the support and the pipe. This develops a corrosive climate.
• Coating damage: The pipe, which is lined with coating, can be destroyed. This opens up the metal to corrosion.
• Cosmetic problems: Either poor drainage or support design can cause congestion. This predisposes the area to high corrosion.

This rusting is concealed. That is why the specialized Corrosion Under Pipe Support (CUPS) inspection is of such significance. It is important to have effective pipeline integrity management.

The importance of CUPS Inspection to the Asset Integrity

The effects of neglecting CUPS may go to an extreme extent both in terms of structural failure and environmental risks. Active inspection is required. This is the reason why Corrosion Under Pipe Support (CUPS) inspection is very crucial:

• An early diagnosis is cost-effective. Detecting corrosion at its beginning stage implies that you are able to repair it on a small scale. This is significantly less expensive when compared to an entire replacement of a pipe.
• It boosts safer and compliant behavior. There is a risk of leakage of hazardous materials due to corrosion, which is uncontrolled. Periodic Corrosion Under Pipe Support (CUPS) examination assists you in ensuring that you comply with regulations and safety standards provided in the industry.
• It increases the life span of assets. Fixing corrosion will enable you to extend the life of your pipelines.
• It minimizes unworked stoppages. Breakdowns happen at unexpected times, which may put your plant out of business. Active inspection eliminates such expensive preventions.

How A-Star Testing & Inspection plans to do the CUPS Inspection

We use advanced Non-destructive testing (NDT) at A-Star Testing and Inspection. This will present the full and correct picture of the condition of your pipeline. We do this without halting what you do. We have one of the best specially designed Corrosion Under Pipe Support (CUPS) inspection services.

1. Advanced Methods of NDT that we apply:
2. Ultrasonic Testing (UT): In the UT, we calculate the thickness of the walls in order to identify areas of material loss due to corrosion.
3. Phased Array Ultrasonic Testing (PAUT): This provides a clear image of the pipe wall. It establishes the extent and the depth of the corrosion.
4. Magnetic Particle Testing (MPT): In this case, MPT detects the presence of minor cracks and surface defects in the vicinity of the support.

The approach has a number of advantages. We leave very little disruption. We give transparent and quality results. Our engineers have experience, as well as are certified for Corrosion Under Pipe Support (CUPS) inspection.

CUPS Inspection Process Step-by-Step

Our procedure is efficient and correct.

1. Site Assessment & Planning: We look through your pipeline to identify high-risk locations. We then design an inspection plan of Corrosion Under Pipe Support (CUPS).
2. Surface Preparation: We may, of necessity, need to prepare the surface to get our equipment in order.
3. NDT Inspection & Data Collection: Our operators employ the NDT techniques to record the condition of the pipe.
4. Analysis & Reporting: We get our engineers to analyze the data. They give an account of the corrosion and integrity of the asset in exhaustive detail.
5. Repair & maintenance recommendations: We provide you with common-sense recommendations. These assist you in repairing damage done and forestalling further CUPS.

Why A-Star Testing & Inspection for CUPS Inspection?

It is important to select the right partner.

Established Proficiency: Our NDT experience amounts to more than 20 years. We know the issues with CUPS.

Quality Machines: We operate up-to-date equipment to get accurate results.

Qualified Staff: We are ISO 9001:2015 certified. They possess international project experience.

Full Services: We do it all, including inspection to planned maintenance.

International Presence: We serve customers in various industries, including oil and gas, marine, offshore, and others.

Corrosion Inspection Under Pipe Support (CUPS) FAQs

Q1: What should be the frequency of a Corrosion under Pipe Support ( CUPS ) inspection?
Ans: It would depend on industry standards. We advise an inspection period of around 1-3 years, generally.

Q2: Is it possible to find CUPS without the necessity to lift the support?
Ans: Yes. This is the purpose of, e.g., PAUT or GWT methods.

Q3: Which industries have the most to gain by employing Corrosion Under Pipe Support (CUPS) inspection?
Ans: The oil and gas, petrochemical, marine industry, and power generation industries are the beneficiaries.

Q4. Does inspection of Corrosion Under Pipe Support (CUPS) necessitate shutting down of the plant?
Ans: This is not always the case. A lot of NDT methods may be applied during the operation of pipelines.

Q5: How do I prevent CUPS in the future?
Ans: Apply Sound Layers of anti-corrosion coatings. Make sure that there are good drainage supports. Maintain a routine checking system.

Conclusion

The Corrosion Under Pipe Support (CUPS) is a subversive threat. It has the potential to cause serious operational and safety threats. It is important to actively manage corrosion and conduct special Corrosion Under Pipe Support (CUPS) inspection. Through A-Star Testing & Inspection, you can receive professional services to spare unnecessary damage and achieve an efficient resolution. CUPS does not have to deal a blow to the integrity of your pipeline. Your expensive infrastructure will be safe in our experienced hands in terms of inspection.